Substance:

This product is particularly suitable for silk screen polishing, you can add the temperature change powder. Light powder. Fragrance powder. Jincong powder, silver onion powder, colorful powder, Symphony powder, luminous powder, gold and silver powder mixed use, is a Used in greeting cards, signs, color box printing and packaging of varnish. It has excellent abrasion resistance, water resistance, oil repellency and no yellowing. It has excellent adhesion properties on paper, water oil surface, UV varnish surface, BOPP, PET, PVC film and provides good gloss and mechanochemistry performance.

Product example:

Greeting cards, signs, box printing and packaging

Product Features:

• High gloss, excellent printability and smooth feel;

• Good abrasion resistance, good anti-sticking property, good heat resistance;

Waterproof and oilproof effect;

• Particularly suitable for screen printing;

• Ink printed for 24 to 48 hours better after self-crosslinking.

Appearance: milky white;

• Solid content: 40 ± 2%;

• Viscosity: 40-100 seconds (4 # cup, 25 ℃);

• pH: 8.0 ± 0.3.

Product Specifications:

High gloss, excellent printability and smooth feel;

Abrasion resistance, good anti-sticking, good heat resistance;

Waterproof and oilproof effect;

Especially for silk screen polishing;

Ink printing is good 24 to 48 hours after self-crosslinking better adhesion.

Physical properties:

Appearance: milky white;

Solid content: 37 ± 2%;

Viscosity: 60-100 seconds (coated 4 # cup, 25 ℃);

PH: 8.0 ± 0.3.

Instructions for use:

1. Varnish and toner mixture ratio in the 2: 1 ~ 5: 1, after mixing evenly printed. Can also be printed immediately after the light oil on the surface of the oil powder;

2. Before using the varnish must be fully stirred evenly, stirring as much as possible in the same direction, to avoid bringing too much bubbles;

3. Silkscreen when the proposed selection of 40 to 75 mesh screen printing network;

4. Substrate surface must be kept clean, no dust, oil;

5. If the substrate for the BOPP, the surface tension of up to 38 or more, in order to receive the best results;

6. After silk screen, it is recommended drying, drying temperature of 60 ~ 90 ℃, 1 to 2 minutes can dry face. Can be naturally dry, naturally dry in 30 to 60 minutes can surface dry, the surface can be stacked after the stack, to be 24 to 48 hours from the glue after the full adhesion to achieve the best; (according to the specific process and product requirements and adjust) ;

7. In the printing process if the viscosity increases, you can add pure water to adjust to the appropriate printing viscosity, if found to dry version or dry too slow, you can use our special slow dry agent or quick drying agent.

Reminder:

1, users in the use of this product, please read the instructions, and must test the suitability of different batches of ink, the actual test India, to confirm the qualified before use in bulk;

2, the above conditions in the tolerance test data for the test conditions under the test results, not as a guarantee value.

Dongguan City, a color of Chemical Technology Co., Ltd. www.yanseco.com Chen Jingli 15916853336