Substrate: Hard and untreated PP (Polypropylene) Similar materials.
Product examples: all kinds of PP daily necessities, stationery, fitness equipment, all kinds of packaging bottles (shampoo, cosmetics packaging), batteries and so on.
Product features: printed surface smooth, bright, good adhesion to the PP material, high wear resistance, resistance to alcohol-resistant white oil and gasoline wipe, printing adaptability. Can be used for printing, not easy to produce drawing phenomenon.
Test items | Adhesion | Scratch resistance | Abrasion resistance | Acid resistance | Alkali resistance | Resistant to alcohol |
Test Results | excellent | 5 level | 5 level | 4-5 level | 4-5 level | 4-5 level |
Product Specifications：
project | Hue | Color concentration | Fineness | Viscosity | Gloss | Mobility | Solid content |
Technical Parameters | Refer to the color card | ≥80% | 7u below | 110-130p | 70-95 | 10-15mm/s | ≥30% |
Instructions for use:
Screen: 150-420 mesh polyester screen printing plate
Scraping: It is recommended to use 65-85 degree polyurethane plastic scraping
Reference amount: 300 mesh screen printing is about 30 ㎡ / ㎏
Dry: natural dry and dry (dry for 20 minutes, dry for more than 24 hours) or 60 ℃ -80 ℃ baking 20-30min
Selection of solvents: the use of 783 slow dry water, 718 dry water, 719 quick drying water and other thinner
Screen cleaning: the choice of organic solvent cleaning (such as: washing water)
Precautions:
1, the use of the product for printing, because PP, PE material surface tension is large, please do the test before printing.
2, the goods for most of the PP, PE materials can be exempted from treatment, but for the smaller surface tension of the material, you can first use PP treatment of water or flame treatment of the substrate after the printing, which can improve the adhesion of ink After processing can not be placed too long to be printed, which may affect the adhesion).
3, the ink is slow reaction fixed ink, test adhesion must be printed more than 24 hours after the test.
Product packaging: 1 kg loaded
Storage conditions: 5 ℃ -35 ℃ conditions for two years, to avoid strong light exposure, anti-contact strong acid, alkali.
Tips:
1, users in the use of this product, please read the instructions, and must test the suitability of different batches of ink, the actual test India, to confirm the qualified before use in bulk;
2, the above conditions in the tolerance test data for the test conditions under the test results, not as a guarantee value.
Dongguan City, a color of Chemical Technology Co., Ltd. www.yanseco.com Chen Jingli 15916853336
