Substance:
Waterproof nylon cloth, no waterproof cloth, luggage cloth, Oxford cloth, nylon plastic.
Product Features:
High gloss, excellent softness, good adhesion to waterproof nylon cloth.
Test items and test results
| Adhesion: Excellent | Resistance to migration: 4-5 level |
| Scratch resistance: 4-5 level | Wear resistance: 4-5 level |
| Resistance to rubbing: 5 level | Acid resistance: 4-5 level |
| Alkali resistance: 4-5 level | Washable: 3-4 grade |
Product parameters:
| Hue: Refer to the color card | Color concentration：8%-15% |
| Fineness：7uthe following | Viscosity：200-280p |
| Gloss：75-85 | Mobility：10-15mm/s |
| Solid content：≥45% |
Instructions for use:
Screen: 150-350 mesh polyester screen printing plate
Scraping: It is recommended to use 65-85 degree polyurethane plastic scraping
Reference amount: 200 mesh screen printing is about 30 ㎡ / ㎏ plastic scraping: the proposed use of 65-85 degrees polyurethane plastic scraping
Dry: natural evaporation dry (dry 7-15 minutes, dry for more than 24 hours) or 100 ℃ below the hot air dry
Selection of solvents: 719 quick-drying water, 718 dry water or 783 slow dry water, cyclohexanone, due to different printing environment temperature appropriate choice
Screen cleaning: the choice of organic solvent cleaning (such as: washing water)
Precautions:
1, the use of solvent dilution of ink, please pay attention to the solubility of the solvent, if the solubility is too weak is prone to reverse the phenomenon of ink, which is necessary to use a strong solvent solution.
2, printed on the bottom of the PVC peritoneum bag cloth, due to PVC solvent resistance is poor, easy to cause printed materials when the pattern of sticky flowers, so pay attention to the ink when the drying situation, while avoiding excessive overlap.
3, printed on the bottom of the PVC peritoneum bag cloth, because PVC contains a large number of plasticizers, likely to cause color migration. Special attention should be paid to the use of better resistance to the permeability of the ink color.
4, due to the variety of waterproof nylon cloth on the market, in particular, different water treatment, the ink may be some waterproof nylon cloth (such as: the surface of silver cloth) poor adhesion, so the use of special attention to strict Of prenatal testing.
5, printing waterproof nylon fabric, in order to improve the adhesion will add the right amount (5% -8%) 9004 or 9005 catalyst to improve the adhesion of the ink, add the catalyst ink in 8 hours run out, otherwise the ink may agglomerate scrapped The
Storage conditions:
5 ℃ -25 ℃ conditions for 36 months, to avoid strong light exposure, anti-contact strong acid, alkali.
Reminder:
1, users in the use of this product, please read the instructions, and must test the suitability of different batches of ink, the actual test India, to confirm the qualified before use in bulk;
2, the above conditions in the tolerance test data for the test conditions under the test results, not as a guarantee value.
Dongguan City, a color of Chemical Technology Co., Ltd
If you need further information about our products, please leave your information, we will arrange the relevant personnel to contact you.
