Photocopiers: soft polyvinyl chloride (PVC), wood, imitation nylon, artificial leather, paper and so on.
Product examples: PVC inflatable toys, household products, shoes, hats, travel bags, balls and so on.
Product features: light, high hiding power, anti-overlap, good softness, suitable for high frequency use.
Test items | Adhesion | Resistant to migration | Scratch resistance | Abrasion resistance | Resistant to rubbing | Acid resistance | Alkali resistance |
Test Results | excellent | 2-3level | 4level | 4level | 3-5level | 3-5level | 3-5level |
Product Specifications：
Project | Hue | Color concentration | Fineness | Viscosity | Gloss | Mobility | Solid content |
Technical Parameters | Refer to the color card | 8%-15% | 7u below | 100-180p | 65-80 | 20-30mm/s | ≥45% |
Instructions for use:
Stencil: 150-300 mesh polyester screen printing plate
Scraping: It is recommended to use 65-85 degree polyurethane plastic scraping
Reference amount: 250 mesh screen printing is about 30 ㎡ / ㎏
Dry: natural evaporation dry (dry 7-15 minutes, dry for more than 30 minutes) or 60 ℃ below the hot air dry
Use solvent: 007 (quick-drying, medium dry, slow dry) solvent; 719 quick-drying water, 718 dry water or 783 slow water, due to printing
The ambient temperature is appropriately selected
Screen cleaning: the choice of organic solvent cleaning (such as: 007 wash water)
Precautions:
1. Printed soft PVC, because the substrate contains a large number of plasticizers can easily lead to print when the ink back to stick phenomenon, affecting the quality of printed materials. Therefore, after the use of the ink printing, we must pay attention to avoid stacking, or the use of isolation paper for isolation.
2. When printing soft PVC, depending on the characteristics of the ink pigment, 203,206,302,308 and all fluorescent ink in the laminated easy to produce color migration and affect the printing of clean. Therefore, in the printing as far as possible the use of good resistance to migration of color, such as: 2030,2060,3020,309 or 3018.
3. Printing on the soft PVC on the color of the ink, it is easy due to the penetration of ink pigment and the impact of the substrate lead to color changes, so we choose the ink when the color must be noted according to the color ink characteristics Select or control the amount.
4. If the print to be high-frequency processing must be noted that 501,801,901,902 color ink has a slight conductivity, high frequency is easy to produce when the phenomenon of ignition. At this time, we must use 500 insulated black, insulated gold, insulated silver instead.
5. When printing soft PVC, use 783 or cyclohexanone as the main diluent, please pay attention to the impact of solvent on the substrate.
Product packaging: 1 kg loaded, 5 kg loaded, 20 kg loaded
Storage conditions: 5 ℃ -25 ℃ conditions for two years, to avoid strong light exposure, anti-contact strong acid, alkali.
Tips:
1, users in the use of this product, please read the instructions, and must test the suitability of different batches of ink, the actual test India, to confirm the qualified before use in bulk;
2, the above conditions in the tolerance test data for the test conditions under the test results, not as a guarantee value.
Buy a message
If you need further information about our products, please leave your information, we will arrange the relevant personnel to contact you.
Dongguan City, a color of Chemical Technology Co., Ltd. www.yanseco.com Chen Jingli 15916853336
