Ink type: modified acrylic resin ink

Uses: can be applied to add hard plexiglass, plexiglass, PC, UV spray surface, stainless steel, anode treatment, plating, hard nylon

Features: smooth and scratch resistance, printing products with good adhesion, light effect, resistance to alcohol and so on.

Other: Hardener is sensitive to moisture and can be used as soon as possible after opening the tank

First, the ink technical parameters：

Second, the use of instructions:

1. Please stir before use;

2. The viscosity of the product for the production formula viscosity, before use, according to the production requirements of the appropriate amount of 783 thinner added;

3. Please add HAC curing agent, add 10%, pay attention to adding curing agent, the ink must be used within eight hours;

4. Baking temperature is recommended: 60 ℃, 30 minutes, since the dry more than 24 hours;

5. Suggested use of the head: 250 mesh ~ 300T;

6. Screen cleaning can be used 007 wash water or cyclohexanone.

7. In the course of use, please pay attention to personal protective work, if the body inadvertently contact the goods, please wash;

Note: After adding the curing agent, please use within eight hours to avoid causing glue glue.

Reminder:

1, users in the use of this product, please read the instructions, and must test the suitability of different batches of ink, the actual test India, to confirm the qualified before use in bulk;

2, the above conditions in the tolerance test data for the test conditions under the test results, not as a guarantee value.

Dongguan City, a color of Chemical Technology Co., Ltd. www.yanseco.com Chen Jingli 15916853336