Photocopiers: waterproof nylon cloth, no waterproof cloth, luggage cloth, Oxford cloth, nylon plastic.
Product features: high gloss, excellent softness, strong hiding power, high strength waterproof nylon cloth with good adhesion is good.
Test items | Adhesion | Resistant to migration | Scratch resistance | Abrasion resistance | Resistant to rubbing | Acid resistance | Alkali resistance | Resistant to washing |
Test Results | excellent | 4-5level | 4-5level | 4-5level | 5level | 4-5level | 4-5level | 3-4level |
Product Specifications：
Project | Hue | Color concentration | Fineness | Viscosity | Gloss | Mobility | Solid content |
Technical Parameters | Refer to the color card | ≥80% | 5u below | 200-280p | 75-95 | 10-15mm/s | ≥30% |
Instructions for use:
Screen: 150-350 mesh polyester screen printing plate
Scraping: It is recommended to use 65-85 degree polyurethane plastic scraping
Reference amount: 200 mesh screen printing is about 30 ㎡ / ㎏
Dry: natural evaporation dry (surface dry 7-15 minutes, hard for more than 24 hours) or 60 ℃ -80 ℃ baking 20-30min
Selection of solvents: 719 quick-drying water, 718 dry water or 783 slow dry water, cyclohexanone, due to different printing environment temperature appropriate choice
Screen cleaning: the choice of organic solvent cleaning (such as: washing water)
Precautions:
1. When using solvent to dilute the ink, please pay attention to the solubility of the solvent, if the solubility is too weak is easy to produce ink anti-rough phenomenon, which is necessary to use a strong solvent solution;
2. Printing on the bottom of the PVC peritoneum bag cloth, due to poor solvent resistance of PVC, easy to cause the printed material when the pattern sticky flowers, so pay attention to the ink when the drying situation, while avoiding excessive overlap;
3. Printing the bottom of the PVC peritoneum bag cloth, because PVC contains a large number of plasticizers, likely to cause color migration. The use of special attention to choose better resistance to permeability of the ink color;
4. Because of the wide variety of waterproof nylon cloth on the market, especially the different water treatment, the ink may be some waterproof nylon cloth (such as: the surface of silver-plated cloth) poor adhesion, so the use of special attention to strict Of prenatal testing;
5. When printing waterproof nylon cloth, in order to improve the adhesion will add appropriate (5% -8%) 9004 catalyst to improve the adhesion of ink, add the catalyst ink in 8 hours run out, otherwise the ink may agglomerate scrapped.
Storage conditions: 0 ℃ -35 ℃ conditions for 36 months, to avoid strong light exposure, anti-contact strong acid, alkali.
Reminder:
1, users in the use of this product, please read the instructions, and must test the suitability of different batches of ink, the actual test India, to confirm the qualified before use in bulk;
2, the above conditions in the tolerance test data for the test conditions under the test results, not as a guarantee value.
Dongguan City, a color of Chemical Technology Co., Ltd. www.yanseco.com Chen Jingli 15916853336
